A Low VOC compliant, urethane single stage topcoat designed to provide superior appearance and depth of color, with improved performance characteristics. Ful-Thane Low VOC Single Stage is easy to apply with better metallic control and enhanced cycle time. Features. Improved hardness development; Superior depth of color; Thousands of OEM colors But at $840 for gallon of paint, hardener, and reducer, I decided to give Ful-thane a go. I picked up a gallon of Ful-Thane, hardener, reducer, quart of clear, and hardener, for $433.16. Cheap enough. I got the cab ready for paint yesterday. This morning, conditions are absoloutely perfect for painting.MIXING COMPONENTS Ful-Thane® HS Urethane Topcoat (IG Quality) Ful-Base® 430-XX Tints Ful-Thane® HS 435-95™ Urethane Binder Ful-Thane® 483-52™ Activator Ful-Thane® 483-54™ Accelerator (Required) MIX RATIO Combine the components by volume (3:1). Mix thoroughly prior to activation. Component Volume It is a single stage, but there is a clear your can mix with it or another to spray after it. dont use clear on single stage. you just put the single stage on, color sand with 1500 or 2000 grit, then buff to shine. if you want to use a clear coat, then you need to use a base/clear setup. personally, i wouldnt use a single stage paint on a car ...Title: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AMReference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Oct 23, 2013 · 8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle . Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages.Re: Is Nason Ful-thane 2K urethane paint good paint? It's getting harder and harder to find good single stage paints any more that can be mixed in the old colors, let alone those that are half-way affordable, since the refinish business has totally gone base/clear.A catalyzed, dried, 1/4"-thick sample of the Nason Ful-Thane® 2K urethane SS remains incredibly flexible.how do you mix nason base coat properly? it state to mix 8:1/2:4, none of the mixing cups i've got have an 1/2 mark on it. the only way i can think to mix it properly is to double the amount of color and reducer in oz's to get a whole oz in activator, which ends up being way to much paint for one coat.Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryAxalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. 65-85 Degrees.Axalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors.Dupont / Nason, Urethane Full Thane 2K Urethane, Single Stage,automotive paint restoration, 1-888-724-6844 Auto Paint Pro, Inc. [email protected] 23/10/2013 · The owner bought the cheapest single stage the paint shop had, Nason Urethane. After shooting we did a light scuff with 1200 to let it gas off for a week.MIXING COMPONENTS Mix 2 parts NasonXL Basecoat Color to 1 part NasonXL Reducer. Thin to spray viscosity of 16 secs with #4 Ford @ 77°F/25°C for spraying. Option for longer re-coating: Add 5% hardener to premixed basecoat Component Volume NasonXL Basecoat Color 2 NasonXL Reducers 1 (447-65 Fast, 447-75 Medium, 447-85 Slow) Package SizesMSDS Technical Data Sheet Description A urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. Features Solventborne Easy to apply Outstanding durability Product Details Available Sizes Mixing Instructions Application Instructions ApplicationCon el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Do not use under any urethane paints other than Nason® Ful-Thane® 2K Urethane. Use same reducer for Bond-Seal™ as recommended for the Nason® single-stage topcoat to be applied. DRY TIMES To topcoat (for Nasco™ and Ful-Base® Topcoats): 10 minutes, but within 8 hours PHYSICAL PROPERTIES All Values Ready To Spray Max.Axalta Nason FulCryl II Acrylic Enamel Gallon Mix Item#: NAS ID 01. An acrylic enamel single-stage topcoat that provides very good gloss, chip resistance and durability for excellent performance characteristics. Please contact store for the proper price suffix for your color. Stock or paint code text may be added in the cart.MIXING COMPONENTS Ful-Thane® HS Urethane Topcoat (IG Quality) Ful-Base® 430-XX Tints Ful-Thane® HS 435-95™ Urethane Binder Ful-Thane® 483-52™ Activator Ful-Thane® 483-54™ Accelerator (Required) MIX RATIO Combine the components by volume (3:1). Mix thoroughly prior to activation. Component Volume A catalyzed, dried, 1/4"-thick sample of the Nason Ful-Thane® 2K urethane SS remains incredibly flexible.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryCon el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)pre-formulated flat/mat clears are SOOOOOOOOO much easier on bigger jobs and all overs. all you do is mix and go. you can adjust the flatness by how many coats and reducer, again so much easier than a flattening ratio with an additive. i've done a few with sikkens mat clear with no problems, now give me a 2 component system where i have to mix some single stage and flattener in it and i cant ...I just got myself all confused and need some clarification. :embarrass Nason Ful-Thane 2K Urethane is a single stage finish but it says 2K in the title, is it just a single stage? Do I have to shoot a clear over it if I’m using a metallic color? The last question is if I use a siphon gun, what tip size and psi works well with it.Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...18-21 seconds in a Zahn #2 cup. 4 hours at 70°F. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic. Refer to the product Technical Data Sheet for complete directions for use.MIXING COMPONENTS Ful-Thane® HS Urethane Topcoat (IG Quality) Ful-Base® 430-XX Tints Ful-Thane® HS 435-95™ Urethane Binder Ful-Thane® 483-52™ Activator Ful-Thane® 483-54™ Accelerator (Required) MIX RATIO Combine the components by volume (3:1). Mix thoroughly prior to activation. Component Volume Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions ApplicationSelectPrime™ 483-87™ 2K Activator (Mid-Temp) SelectPrime™ 483-88™ 2K Activator (Hi-Temp) MIX RATIO Combine the components by volume (4:1). Mix thoroughly prior to activation. Component Volume SelectPrime™ 421-17™ / 421-19™ 2K Urethane Primer 4 SelectPrime™ 483-88™ / 483-87™ 2K Activator 1 TINTABILITY Not recommended POT LIFEJust got done spraying red Nason 2k Ful-thane single stage for the first time. I have some orange peel here and there along with some dirt in the hood. I have color sanded Centari and Delstar, but I am not sure how to tackle this with this newfangled urethane. I intend to hand wet sand with 1200 then buff.MIX RATIO Combine the components by volume (4:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane® 2K Urethane Topcoat (IS Quality) 4 Ful-Base® 483-56™ Low VOC Activator 1 Ful-Base® 441-60™ / 441-66™ / 441-68™ Reducer 2 ADDITIVES Fisheye Eliminator Add ½ to 2 oz Nason® 495-02™ Low VOC Fisheye Eliminator per ready ...Nason Full-Thane lists the ratio as 8:1:2 My mix cups have 8:1:1 Using the '5' scale the distance between the 1:1 is 3/8". Will adding 3/8" mark to the last column give me an 8:1:2 ratio? View attachment 1715764917MSDS Technical Data Sheet Description A urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. Features Solventborne Easy to apply Outstanding durability Product Details Available Sizes Mixing Instructions Application Instructions ApplicationParts by Volume. IF Quality. 8. 483-00™. 1/2. 441-2X. 4. Viscosity. 20-21 seconds in a Zahn #2 cup.Ful-Thane® 2K Urethane Binder (IB Quality) GENERAL DESCRIPTION A 5.0 lb/gal (600 g/l) VOC compliant, urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXINGThe perfect mix of paint, catalyst, and reducer has been achieved. In a mixing bowl, mix two parts NasonXL Basecoat Color and one part NasonXL Reducer. The viscosity of the spray will be 16 seconds, and the temperature of the spray will be 77 degrees F / 25 degrees C. 2 to 3 coats of primer are applied with a flash period of 4 to 8 minutes.I sprayed over sanded 2K primer. Before I sprayed I wiped the panel with 70% rubbing alcohol. The fisheyes/solvent pop didn't show up until an hour or two after the last coat. I sanded down the panel with 220 and some of the craters are fairly deep but non of them go to the primer. Could it be oil in the air section of the gun?MSDS Technical Data Sheet Description A urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. Features Solventborne Easy to apply Outstanding durability Product Details Available Sizes Mixing Instructions Application Instructions ApplicationDuPont Top Coat Nason® Ful-Thane® 2K IB Quality Single-Stage Topcoat FUL-THANE® 2K URETHANE Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Download tech data.Nason Full-Thane lists the ratio as 8:1:2 My mix cups have 8:1:1 Using the '5' scale the distance between the 1:1 is 3/8". Will adding 3/8" mark to the last column give me an 8:1:2 ratio? View attachment 1715764917435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryAxalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. 65-85 Degrees.A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsDetailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.MIXING COMPONENTS Mix 2 parts NasonXL Basecoat Color to 1 part NasonXL Reducer. Thin to spray viscosity of 16 secs with #4 Ford @ 77°F/25°C for spraying. Option for longer re-coating: Add 5% hardener to premixed basecoat Component Volume NasonXL Basecoat Color 2 NasonXL Reducers 1 (447-65 Fast, 447-75 Medium, 447-85 Slow) Package SizesDupont Fleet book, page by page. If you are on a PC click on any of the. images and the images will pop up. You can hit next and the whole or most of the page will turn into a gallery.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryFul-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...A catalyzed, dried, 1/4"-thick sample of the Nason Ful-Thane® 2K urethane SS remains incredibly flexible.Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)A Low VOC compliant, urethane single stage topcoat designed to provide superior appearance and depth of color, with improved performance characteristics. Ful-Thane Low VOC Single Stage is easy to apply with better metallic control and enhanced cycle time. Features. Improved hardness development; Superior depth of color; Thousands of OEM colors A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsNason Full-Thane lists the ratio as 8:1:2 My mix cups have 8:1:1 Using the '5' scale the distance between the 1:1 is 3/8". Will adding 3/8" mark to the last column give me an 8:1:2 ratio? View attachment 1715764917I sprayed over sanded 2K primer. Before I sprayed I wiped the panel with 70% rubbing alcohol. The fisheyes/solvent pop didn't show up until an hour or two after the last coat. I sanded down the panel with 220 and some of the craters are fairly deep but non of them go to the primer. Could it be oil in the air section of the gun?Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages.A catalyzed, dried, 1/4"-thick sample of the Nason Ful-Thane® 2K urethane SS remains incredibly flexible.Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.one thing to keep in mind is the finish may dull out in a month after the initial cut/buff. nason is pretty easy to wet sand and buff after a month from what i have experienced with it. i noticed that if i do the wet sanding/buffing right after painting, it dulls out in about a month due to the paint curing and shrinking a little. so i prefer to have a vehicle back in a month or so and do it ...Nason Ful-Thane IS Quality Single-Stage Topcoat. A urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Click here to visit the product catalog.we were going to use the Nason ful-thane , but our supplier suggested the Imron. I was amazed at how well it sprayed. You can plow that stuff on & it will not run. Im seriously thinking about using it when I do my truck. you can even get it in Flat, Semigloss, or regular gloss. RM's Uno is good also, I like the way it lays down, & it seems to last.MIX RATIO . Combine the components by volume (4:1:1). Mix thoroughly prior to activation. Component Volume . Ful-Thane 2K Urethane Single Stage Color (NIB Quality) 4 . Axalta VS5300 Urethane Activator 1 . Axalta VS5160 / VS5170 / VS5180 / VS5190 Reducer 1 435-00, 435-01 Ful-Thane Binders VS5300 Urethane Activator VS5160, VS5170, VS5180, VS5190 ...A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application The perfect mix of paint, catalyst, and reducer has been achieved. In a mixing bowl, mix two parts NasonXL Basecoat Color and one part NasonXL Reducer. The viscosity of the spray will be 16 seconds, and the temperature of the spray will be 77 degrees F / 25 degrees C. 2 to 3 coats of primer are applied with a flash period of 4 to 8 minutes.Axalta Nason Fulthane 2K Urethane Quart Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.
we were going to use the Nason ful-thane , but our supplier suggested the Imron. I was amazed at how well it sprayed. You can plow that stuff on & it will not run. Im seriously thinking about using it when I do my truck. you can even get it in Flat, Semigloss, or regular gloss. RM's Uno is good also, I like the way it lays down, & it seems to last.. Cicero
Ful-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB)Parts by Volume. 491-16™. 1. 483-19™. 1. Viscosity. 16-22 seconds in a Zahn #2 cup. Pot Life. 24 hours at 70°F.A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers. Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Catalyst Ful-Base® 441-20™ Reducer Fast Ful-Base® 441-21™ Reducer Medium Ful-Base® 441-22™ Reducer Slow Ful-Base® 441-29™ Reducer Super Flow MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.Item#: NAS 400-50 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. GM Code 12 White 400-50 Gallon.A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)18-21 seconds in a Zahn #2 cup. 4 hours at 70°F. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic. Refer to the product Technical Data Sheet for complete directions for use.To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.SelectPrime™ 483-87™ 2K Activator (Mid-Temp) SelectPrime™ 483-88™ 2K Activator (Hi-Temp) MIX RATIO Combine the components by volume (4:1). Mix thoroughly prior to activation. Component Volume SelectPrime™ 421-17™ / 421-19™ 2K Urethane Primer 4 SelectPrime™ 483-88™ / 483-87™ 2K Activator 1 TINTABILITY Not recommended POT LIFEitem 3 Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit $130.00 Free shippingIt is a single stage, but there is a clear your can mix with it or another to spray after it. dont use clear on single stage. you just put the single stage on, color sand with 1500 or 2000 grit, then buff to shine. if you want to use a clear coat, then you need to use a base/clear setup. personally, i wouldnt use a single stage paint on a car ...DuPont Top Coat Nason® Ful-Thane® 2K IB Quality Single-Stage Topcoat FUL-THANE® 2K URETHANE Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Download tech data.Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Title: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AMIf you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ....